Product ID:25126, BOWMAWELD SERIES 25120 WELDING (SUPDAT)
MSDS Date:01/04/1993
FSC:3439
NIIN:00N064895
MSDS Number: BZKVM

BOWMAN DISTRIBUTION, BARNES GROUP INC

850 EAST 72ND STREET
CLEVELAND, OH 44103
US

Emergency Phone: 303-623-5716

Info Phone: 216-391-7200

Cage: 05575

BOWMAN DISTRIBUTION, BARNES GROUP INC.

CLEVELAND, OH 44103 US

Telephone: (216) 391-7200

Cage: 05575

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 65-75%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 10(FE*2O*3)MG/M3 MFR

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1-11%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9495

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9495

CELLULOSE (PAPER FIBER)

CAS: 9004-34-6

RTECS: FJ5691460

Fraction By Weight: 1-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9495

SILICON DIOXIDE

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-11%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

POTASSIUM SILICATE

CAS: 1312-76-1

Fraction By Weight: 1-11%

OSHA PEL N/K

ACGIH TLV: 10(FE*2O*3)MG/M3 MFR

FELDSPAR

CAS: 68476-25-5

Fraction By Weight: 1-11%

OSHA PEL N/K

ACGIH TLV: 10(FE*2O*3)MG/M3 MFR

NUMBER OF WELDS & VOL OF WORK AREA, QTY & AMT OF

RTECS: 9999999ZZ

PLUME, AS WELL AS PRESENCE OF CONTAMINATS IN

RTECS: 9999999ZZ

CLEANING & DEGREASING ACTIVITIES). ONE REC WAY TO

RTECS: 9999999ZZ

WORKERS ARE EXPOSED IS TO TAKE AIR SAMPLE INSIDE

RTECS: 9999999ZZ

ING 11. ANSI/AWS F1.1 AVAILABLE FROM THE AMERICAN WELDING

RTECS: 9999999ZZ

FUME & GAS DECOMP PRODS, NOT INGS IN

RTECS: 9999999ZZ

ORIGINATING FROM VOLATILIZATION, REACTION/OXIDATION

RTECS: 9999999ZZ

METAL, COATING, ETC. AS NOTED ABOVE. THESE

RTECS: 9999999ZZ

NOT AS METALS (CHARACTERIZATION OF ARC WELDING FUME

RTECS: 9999999ZZ

CONSITITUENTS WOULD INCLUDE COMPLEX OXIDES OF IRON,

RTECS: 9999999ZZ

CARBON MONOXIDE, AND CARBON DIOXIDE. OZONE AND

RTECS: 9999999ZZ

TRAIN THE WELDER TO KEEP HIS HEAD OUT OF THE FUMES.

RTECS: 9999999ZZ

FILTER LENS. AS RULE OF THUMB, START W/SHADE

RTECS: 9999999ZZ

WHICH GIVES SUFFICIENT VIEW OF THE WELD ZONE.

RTECS: 9999999ZZ

RADIATION, SPARKS, & ELECTRICAL SHOCK. SEE

RTECS: 9999999ZZ

PROT FACE SHIELD & MAY INCLUDE ARM PROTECTORS,

RTECS: 9999999ZZ

CLOTHING. TRAIN THE WELDER NOT TO TOUCH LIVE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES AND GASES CAN BE DANGEROUS TO
YOUR HEALTH. ACUTE: OVEREXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS: DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF
NOSE, THROAT OR EYES. CHRONIC: MA Y LEAD TO SIDEROSIS (IRON
DEPOSITS IN THE LUNGS) AND IS BELIEVED BY SOME INVESTIGATORS TO
AFFECT (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:PULMONARY FUNCTION. ARC RAYS CAN
INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:PREEXISTING RESPIRATORY OR ALLERGIC
CONDITIONS MAY BE AGGRAVATED IN SOME INDIVIDUALS.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS. INGEST:CALL MD IMMEDIATELY .
INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) .
EY ES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD .

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARK CAN IGNITE
COMBUSTIBLES. REFER TO ASN Z49.1 FOR FIRE PREVENTION DURING
WELDING.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE A NIOSH/MSHA RESPIRABLE FUME RESPIRATOR OR
AN AIR-SUPPLIED RESPIRATOR WHEN WELDING IN A CONFINED SPACE OR
WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:USE ENOUGH VENT, LOC EXHST AT ARC/BOTH TO KEEP FUMES &
GASES BELOW TLV'S IN WORKER'S BRTHNG ZONE & GENERAL AREA.(ING 19)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FACE SHIELD W/(ING 22)
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
WEAR HEAD, HAND, & BODY PROT WHICH HELP TO PVNT INJURY FROM (ING
22)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART #:ELECTRODE(GEN PURPOSE, ADDED STRENGTH, MILD
STEEL ELECTRODES). MATLS TO AVOID:PROCESS, PROCS, & ELECTRODES
USED. OTHER CONDTNS WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES
& GASSES TO WHICH WORKERS MAY BE EXPOS INCLUDE:COATING ON METAL
BEING WELDED(SUCH AS PAINT, PLATING/GALVANIZATION)(ING 8)

Stability Indicator/Materials to Avoid:YES
WELDING FUMES CANNOT BE CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH
ARE DEPENDENT UPON METAL BEING WELDED, (SUPDAT)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WHEN ELECTRODE IS COMSUMED, FUME & GAS
DECOMP PROD ARE DIFF IN PERCENT & FORM FROM INGS LISTED IN INGS
SECTION.(ING 13)

Waste Disposal Methods:DISPOSE OF ANY GRINDING DUST OR WASTE RESIDUES
IN ACCORDANCE WITH EPA OR LOCAL, FEDERAL, AND STATE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.